What happens after an AI PPE camera flags a breach
We understand that among the questions regarding AI PPE cameras, one is focused on how HSQE managers have is regarding the specificity, and the concern that it will catch absolutely everything and just bury you in alerts. The real issue is what happens after a detection.

We understand that among the questions regarding AI PPE cameras, one is focused on how HSQE managers have is regarding the specificity, and the concern that it will catch absolutely everything and just bury you in alerts.
The real issue is what happens after a detection. Who gets it? How quickly does it need to be dealt with? Does anyone actually look at what the camera has seen?
The first step: the gate check
tries to get the relevant information to someone who can act, rather than assess iConstruction site access control has a clear purpose in that it verifies who you are, that you've completed the requisite induction, that your CSCS is up to date.
With the right software, you don't find out about a missing hard hat or missing high visibility vest halfway through the day's work, it is presented as an alert as the person comes through the door.
The camera will detect a potential PPE breach and it's then up to a supervisor or gate team member as to what action is taken.
Alert Prioritisations: What is it & how does it work
A missing glove at the entrance and a missing harness at the leading edge are both indeed PPE breaches. They are not the same risk though and don't necessarily need to reach the same person at the same speed.
This is where alert prioritisation comes in, a reliable AI PPE detection shouldn't treat every single issue it identifies as a red flag as that very quickly makes the system unmanageable.
For example, VISion AI structures its output in three tiers, each of which is for a different purpose.
#1 Immediate critical alerts
These are the detections that need to be dealt with promptly due to the potential seriousness of the issue, a lack of fall protection in a work at height situation or an unsafe plant and machinery interaction.
The bottom line is that the system is attempting to get the relevant information to someone who can then take action, rather than assessment in retrospect.
#2 End-of-day compliance reporting
Note that not every detection means that someone should get up and leave what they're doing; in fact, if there is no immediate threat, some PPE breaches are better discussed as part of a group at the end of the shift; this is especially true if the aim is to get a feel for the compliance pattern.
#3 Live dashboards
Live dashboards are a feature that allows you to see what is going on across the site even when you're not there, so instead of just looking at alerts, you can see how compliance is actually going.
Who sees what and when?
Once a detection has been classified, it is important to understand where it goes next, normally, a critical alert will go straight to a designated phone. On the other hand, a less critical detection may go to the control room for review.
Recurring compliance issues on the other hand will be recorded for the end of day report.
Something to remember is that the configuration has to be such that it actually reflects how the site operates.
Getting it wrong is one of the fastest ways to generate alert fatigue. If too many people are getting too many alerts then the chance of important alerts being missed goes up.
A well tuned system should make it easier to see what needs looking at rather than create another stream of information for the site teams to wade through.
Between the camera and the monitoring team: What happens?
Something important is that a camera identifying something doesn't in itself mean that there's serious action needs to be taken.
For example, factors such as reflections, lighting, or even workers temporarily taking equipment out of non-working areas can all make for detections which have to be interpreted.
This is why human oversight is still required, as control room operators can validate the flagged events prior to them being passed on to the site teams. This means that the false positives are filtered out so only real breaches get through.
What’s good practice: How to alert workers about their PPE
When a supervisor gets an alert regarding PPE, the next step isn't necessarily always a disciplinary conversation; in fact in many cases the most useful thing to do is a very brief discussion with the operative.
Supervisors with the right information can go through what was seen, where it was seen and why the equipment was required, using the footage as the basis of the discussion.
What can access control help with?
Access control records provide information required to keep you the manager and the contractor safe. These records include the worker's subcontractor and induction status, which can assist the site team to work out who is involved and whether it's appropriate to raise the matter with a particular employer.
Do note however, repeat breaches should still be dealt with through the site's existing disciplinary procedures.
What to do when the same alert keeps coming back…
Repeated alerts in the same place at the same time are almost never down to just one person, so if a number of operatives are going into an area repeatedly without the same PPE then it's worth asking whether there's a wider issue there.
You should begin investigating the alerts particularly if there are repeats, since they help you understand the variables that are causing repeat safety breaches. For instance, perhaps the PPE station is in a bad location, or the work itself means that the operatives are taking the equipment off before they even get to the area.
The detection in itself doesn't answer those questions, but the data can point you in the right direction.
Rather than treating each detection as a standalone event, the HSQE teams can use the recurring information to feed into better structure of health and safety.
AI PPE detection CCTV: Can you trial it on your site?
A demo can show you how the AI PPE detection works, but it can't tell you how it's going to perform on your site with your own people and your own working environment.
That's the aim of VIS Systems' Proof on Site programme, the 30 day trial enables contractors to see VISion AI in action on an active construction site, including how the detections are presented, how the alerts are dealt with and what information is generated.
With VISion AI, at the end of the 30 days, users get a Site Safety Insight Report which shows what was detected, where the risk was, and what behaviours were repeated.
Rather than making up their minds based on demo footage, you have actual site information; to find out more, get in touch with our team today.
Frequently Asked Questions
How do you stop the AI PPE cameras generating so many alerts?
The sheer volume of alerts are cleverly managed, and this is done through prioritisation, meaning the critical alerts are split from the end-of-day compliance reporting. Not to mention there should always be human validation in the control room when you choose a PPE CCTV provider, as this helps to prevent a massive number of alerts from getting through to the teams on site.
Can AI PPE detection check at the construction site access control?
Yes. AI PPE detection can be deployed at site entrances in conjunction with access control pods and turnstiles. The access control will confirm that the operative is permitted to enter and the VISion AI will flag any potential PPE breaches. The site team member can then deal with the issue prior to the operative getting to the works.
Who gets the AI PPE detection alerts on site?
Ultimately this is down to the site's agreed alerting configuration, a critical detection may be sent straight to a responsible supervisor, other events may be reviewed by the control room operators or may be included in the compliance reports.
Are AI PPE detections checked by a person prior to them getting to the site team?
Flagged events can be validated by VIS Systems control room operators prior to being passed on to the site teams. This provides an extra layer of human judgement to help differentiate between a real safety incident and a detection which doesn't in fact require any action.
What should a supervisor do when an AI PPE camera flags a breach?
The right response depends on the severity of the breach; for example, in situations where there is an immediate safety risk, it should be intervened and promptly resolved. Yet for less urgent issues, a short conversation, supported by the relevant footage, can help establish what happened and whether further action is required.
Can AI PPE detection and access control be moved as the site layout changes?
Yes, portable access control pods can be relocated as entrances change, while VISion AI configuration can be adjusted remotely to reflect new monitoring zones, restricted areas and work-at-height locations.



